Tail wheel housing for 14-19-2

O

oldpilot71

New member
This part contains the locking pin and spring and is connected to the nutcracker.The part number is listed as 19 on the assembly drawing and is made of aluminum. My Email is mtfishbur@hotmail.com
 
Hi OldPilot71... what assembly drawing are you referring to? I would love to have engineering drawings for any and all of the fabricated parts for my -2 & -3. These drawings must exist somewhere but where/how can we gain access to this information? Ultimately we may be forced to fabricate our own parts and I would rather have the original factory specs that do a reverse engineering job. As for your post I am a little unclear if you are asking for help or offering to share some info that you have? Rob
 
Rob58 said:
Hi OldPilot71... what assembly drawing are you referring to? I would love to have engineering drawings for any and all of the fabricated parts for my -2 & -3. These drawings must exist somewhere but where/how can we gain access to this information? Ultimately we may be forced to fabricate our own parts and I would rather have the original factory specs that do a reverse engineering job. As for your post I am a little unclear if you are asking for help or offering to share some info that you have? Rob
Click to expand...

I need this part mine is worn and I would like to replace it.I have the drawing for the lower bushing and the horn,however the list gives numbers that may be for sequencing for the tail wheel assembly and the housing is referenced as number 19.I do not have a parts list for this airplane.I would appreciate any help
 
I had the same problem a little while ago. Tailwheels take a beating! I have a drawing of it I can copy for you.I will look up the drawing # today. It is a Bellanca drawing of the tailwheel and its variants. Robert might have it in the club so let me get the #. Lynn :|
 
As I will be working on my tailwheel soon I'd love to have a copy of the drawings too. On the broader subject of engineering drawings do we have an index of all drawings that exist for our birds? Does the Club have a set of all of these drawings? Thanks, Rob
 
I have drawings # 8316 #15091 #15085 all tailwheels purchased from Cy Galley in the club. They are big not letter or legal size. Lynn
 
You must log in or register to reply here.
Back
Top