Rudder

[lwford]

Does anybody with a 14-19 or 14-19-2 have the correct routing of the rudder cables? It appears on my crate that years ago Weber put new tailwheel cables on the crate. I found that they took out the tail wheel springs and put turnbuckles in there place along with 5 nicropress fittings on the rudder cables. A royal mess!! I need some input on this as I would like to put the crate back to the way it was coming out of Bellanca factory. Lynn N9818B :?

 

[lwford]

Well I got a response from AAC and they told me the rudder cables connect back to the rudder and the tail wheel is then clamped to those cables. I installed the new springs instead of the turn buckles
and the crate handles much softer on the ground with the new springs installed. What were they thinking?
The springs and clamps from AAC were 200 bucks which seemed quite pricey to me but I will support them as they need to keep in business. When I asked for the drawing of the rudder connections and such ,they told me NO----Dame! Lynn N9818B